Computer
Energy Saving Tips PC, Laptop Computers article I will discuss about the Energy Saving Tips Pc and Laptop. of course you feel the electricity payment swollen because of the use of computer or laptop every day? Moreover, using pulses of electrical current, of course, we have to be more efficient as efficient as possible so that the electrical pulses we not quickly exhausted. So to overcome this, the following AllSoft share tips on how to save energy and laptop computers.1. Set the Lighting and Contrast Monitor
Perhaps for the layman or novice computer user, they rarely pay attention to their monitor
settings. What is meant in this case is the level of illumination and contrast set too high to be able to spend a lot of energy. So for that you must be able to adjust the lighting and contrast, to adjust the monitor brightness and contrast using the buttons in the bottom of the monitor.
2. Turn off the Monitor
Tips which of the two is to turn off the monitor, especially the monitor type is the type of CRT (Cathode Ray Tubel), because these types of monitors consume more electricity. So, if you want to leave the PC for a long time, you should turn off your monitor.
You can also set its Windows to automatically direct die within a certain time, it can be done in a way, click "Control Panel-Options'. In the "Power Options Properties" tab click "Power Schemes". Then click the arrow in the "Power Schemes" and select "Home / Office desk". Then select the desired time on the "Turn Off Monitor" and click on "Apply" and "OK".
3. Turn off the hard drive
Although we are not doing anything on our computer, but your data will always be read from the hard disk (by the operating system and some applications). For this reason, the hard disk hard disk drive will continuously spin and of course this will waste energy. If you want to leave your PC for a long time, then you should turn off your PC's hard disk. In the "Power Options Properties" then click the "Power Schmes". Click the arrow in the "Power Schemes" and select "Home / Off desk". Then click "Turn off hard disks" and select the time. Then click "Apply" and "Ok".
4. Turn off other equipment
Turn off other equipment such as speakers, external modems, scanners, Zip drives and printers. Because the equipment it is to spend a lot of energy. Often people leave the equipment in an active state, even when we were out for a long time.
5. Mode Hibernate
The hibernate mode is the facility to shut down, but does not close or shut down applications that we are open earlier. This can be done by Mode "Hibernate". With this mode, the contents of main memory (RAM) will be stored in the hard disk. How to do the hibernate mode is as follows, the "Power Options" tab click on "Hibernate". Then click the close box "Enable Hibernation". Also click on the "Advanced" tab. In the "When I press the power button" and then click the arrows then click on "Hibernate". Click "Apply" and "Ok". After that press the "Power" on your computer. Already functioning hibernate mode, press the "Power" again, your computer will turn on and will automatically open the application you have open earlier.
6. Standby Mode
In order to save energy, we recommend setting your monitor and hard disks are in the lowest part in standby mode. If you want to leave your PC for a while, you should activate the standby mode. But you should know is, when the active standby mode the data that you have not saved may be damaged or lost if your PC is damaged. We recommend that you first save your data or documents before you activate it in standby mode. Standby mode can be done in a way, click the "Start-Turn Off computer" and click "Stanby".
7. Use UPS
Always use UPS, because this tool can help save the data or shut down during a power failure. UPS equipment to set up and configure the tool "Power Option Properties" tab and select the UPS. Section status in the UPS tab displays the approximate number of minutes that can be supported by UPS to your PC. Actually many ways to configure the UPS, but this depends on the model and capacity of the UPS used.
8. Battery Laptop
If you charge the battery of the laptop, make sure its charge process is complete. Because the charge is done half-way and then resumed, it instead will spend a lot of energy. If you want to travel, you should always take tambaha battery. To save battery usage. You can use the Hibernate feature / Suspended or use an electric socket that plugs into a wall outlet.
9. USB port
If while you are using the laptop and then you insert one into the USB port on your laptop when it's finished you should immediately release it. Because the equipment is still plugged in the USB port, it can spend energy on your PC or laptop. Should remove it when pemakainnya thats enough.
Scheme 10. Energy Use Laptop
Usually the laptop manufacturers also includes features and power management software. This software is very useful for the consumer laptop, because the software is able to regulate the use of the battery and the electric power that is being used. In this software there are several options that can be used to determine the load of hard disks and other energy that is being used by the laptop. Among them know the speed of the processor or monitor the proper lighting to conserve battery life. This software also can be a watchdog for us to use a laptop.
0 comments: