Setting VLAN dan Router

10:42 PM Unknown 0 Comments

Setting VLAN dan Router


SWITCH 1

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name laras
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name ira
Switch(config-vlan)#exit
Switch(config)#interface fastEthernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit

Switch(config)#interface fastEthernet 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit

SWITCH 2
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 30
Switch(config-vlan)#name eko
Switch(config-vlan)#exit
Switch(config)#vlan 40
Switch(config-vlan)#name heru
Switch(config-vlan)#exit
Switch(config)#interface fastEthernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Switch(config)#interface fastEthernet 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit

ROUTER 1
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fastEthernet 0/0
Router(config-if)#ip address 192.168.10.10 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit

Router(config)#int fastEthernet 0/1
Router(config-if)#ip address 192.168.5.5 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit

Router(config)#int fastEthernet 0/0.30
Router(config-subif)#encapsulation dot1Q 30
Router(config-subif)#ip address 192.168.30.33 255.255.255.240
Router(config-subif)#exit

Router(config)#interface fastEthernet 0/0.40
Router(config-subif)#encapsulation dot1Q 40
Router(config-subif)#ip address 192.168.40.49 255.255.255.240
Router(config-subif)#exit

ROUTER 2
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fastEthernet 0/0
Router(config-if)#ip address 192.168.20.129 255.255.255.192
Router(config-if)#no shut
Router(config-if)#exit

Router(config)#int fastEthernet 0/1
Router(config-if)#ip address 192.168.5.6 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit

Router(config)#int fastEthernet 0/1.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip address 192.168.10.33 255.255.255.224
Router(config-subif)#exit

Router(config)#interface fastEthernet 0/1.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip address 192.168.20.65 255.255.255.224
Router(config-subif)#exit

SWITCH 3
Switch#en
Switch#vlan database
Switch(vlan)#vlan 10 name laras
VLAN 10 added:
Name: laras
Switch(vlan)#exit
APPLY completed.
Exiting....

Switch#vlan database
Switch(vlan)#vlan 20 name ira
VLAN 20 added:
Name: ira
Switch(vlan)#exit
APPLY completed.
Exiting....


TRUNK

Router 1
Switch>en
Switch#conf t
Switch(config)#interface fastEthernet 0/5
Switch(config-if)#switchport mode trunk

Router 2
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/5
Switch(config-if)#switchport mode trunk

Router 3
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/3
Switch(config-if)#switchport mode trunk

IP ROUTE

Route 1
Router>en
Router#conf t
Router(config)#ip route 192.168.20.128 255.255.255.192 192.168.5.6
Router(config)#ip route 192.168.10.32 255.255.255.224 192.168.5.6
Router(config)#ip route 192.168.20.64 255.255.255.224 192.168.5.6

Router 2
Router>en
Router#conf t
Router(config)#ip route 192.168.20.128 255.255.255.192 192.168.5.6
Router(config)#ip route 192.168.10.32 255.255.255.224 192.168.5.6

Router(config)#ip route 192.168.20.64 255.255.255.224 192.168.5.6




0 comments:

Subscribe to: Post Comments (Atom)