Setting VLAN Menggunakan Packet Tracher

10:24 PM Unknown 0 Comments

Setting VLAN Menggunakan Packet Tracher


SWITCH 1

Switch>en
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 50
Switch(config-vlan)#name laras
Switch(config-vlan)#exit
Switch(config)#vlan 60
Switch(config-vlan)#name sofia
Switch(config-vlan)#exit
Switch(config)#interface fa 0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 50
Switch(config-if)#exit

Switch(config)#interface fa 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 50
Switch(config-if)#exit
Switch(config)#interface fa0/5
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 60
Switch(config-if)#exit
Switch(config)#interface fa 0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 60
Switch(config-if)#exit

SWITCH 2
Switch>en
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 50
Switch(config-vlan)#name laras
Switch(config-vlan)#exit
Switch(config)#vlan 60
Switch(config-vlan)#name sofia
Switch(config-vlan)#exit
Switch(config)#interface fa 0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 50
Switch(config-if)#exit
Switch(config)#interface fa0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 50
Switch(config-if)#exit
Switch(config)#interface fa0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 60
Switch(config-if)#exit
Switch(config)#interface fa0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 60
Switch(config-if)#exit

ROUTER

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int gigabitEthernet 0/1
Router(config-if)#ip address 192.168.10.5 255.255.255.252
Router(config-if)#no shut

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

Router(config-if)#exit
Router(config)#int gigabitEthernet 0/0
Router(config-if)#ip address 192.168.20.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

Router(config-if)#exit
Router(config)#interface gigabitEthernet 0/1.50

%LINK-5-CHANGED: Interface GigabitEthernet0/1.50, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1.50, changed state to up

Router(config-subif)#encapsulation dot1Q 50
Router(config-subif)#ip address 192.168.50.135 255.255.255.128
Router(config-subif)#exit
Router(config)#int gigabitEthernet 0/1.60

%LINK-5-CHANGED: Interface GigabitEthernet0/1.60, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1.60, changed state to up

Router(config-subif)#encapsulation dot1Q 60
Router(config-subif)#ip address 192.168.60.70 255.255.255.192
Router(config-subif)#exit

TRUNK
Switch>en
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fa 0/1
Switch(config-if)#switchport mode trunk

Switch>en
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fa 0/5
Switch(config-if)#switchport mode trunk


Vlan 50
PC 1 (fa 0/2)
IP Address      192.168.50.129
Subnet Mask   255.255.255.128
Default Gtw    192.168.50.135
DNS Server     192.168.20.3

PC 2 (fa 0/3)
Ip Address      192.168.50.130
Subnet Mask   255.255.255.128
Default Gtw    192.168.50.135
DNS Server     192.168.20.3

PC 3 (fa 0/1)
Ip Address      192.168.50.131
Subnet Mask   255.255.255.128
Default Gtw    192.168.50.135
DNS Server     192.168.20.3

PC 4 (fa 0/2)
Ip Address      192.168.50.132
Subnet Mask   255.255.255.128
Default Gtw    192.168.50.135
DNS Server     192.168.20.3

Vlan 60
PC 1 (fa 0/4)
Ip Address      192.168.60.65
Subnet Mask   255.255.255.192
Default Gtw    192.168.60.70
DNS Server     192.168.20.3

PC 2 (fa 0/5)
Ip Address      192.168.60.66
Subnet Mask   255.255.255.192
Default Gtw    192.168.60.70
DNS Server     192.168.20.3

PC 3 (fa 0/3)
Ip Address      192.168.60.67
Subnet Mask   255.255.255.192
Default Gtw    192.168.60.70
DNS Server     192.168.20.3

PC 4 (fa 0/4)
Ip Address      192.168.60.68
Subnet Mask   255.255.255.192
Default Gtw    192.168.60.70
DNS Server     192.168.20.3

SERVER
Ip Address      192.168.20.3
Subnet Mask   255.255.255.0
Default Gtw    192.168.20.1
DNS (laras.com) (Ip: 192.168.20.3)

HTTP (Cisco Packet Tracer di ganti Laras Sofia Ranti)

0 comments:

Subscribe to: Post Comments (Atom)